item: Diamond Blade Granite NG5
on request
Granite NG5
on request
item description
Soldered diamond blade type NG5 with short tooth performance and silent-steel-body for cutting hart granite and quartz surfaces. The range of application are stationary machines such as block saws, multiblade saws, table saws und bridge saws. With 20mm segment-lenght and optional with 10mm or 18mm segment-height by request in conical-type. The NG5 has a very good durability while easy cutting with raw edegs. With a improved mud remove and cooling.By special request, it is possible to supply diamond blades with diamond segments according to your own individual requirements. This diamond blade is for wet use only.
Made in Germany.
Please specify the boreholes of the machine.
| order number | Ø mm
(Ø inch) |
segment
w x h x l (mm) w x h x l (inch) |
number of segments | price (€) | Enquiry |
| T035- | Ø 350 (Ø 13.8) |
20 x 3,0 x 10 o.18 () |
on request |  |
|
| T040- | Ø 400 (Ø 15.7) |
20 x 3,3 x 10 o.18 () |
on request | |
|
| T050- | Ø 500 (Ø 19.7) |
20 x 3,8 x 10 o.18 () |
on request | |
|
| T060- | Ø 600 (Ø 23.6) |
20 x 4,6 x 10 o.18 () |
on request | |
|
| T062- | Ø 625 (Ø 24.6) |
20 x 4,6 x 10 o.18 () |
on request | |
|
| T065- | Ø 650 (Ø 25.6) |
20 x 5,0 x 10 o.18 () |
on request | |
|
| T070- | Ø 700 (Ø 27.6) |
20 x 5,0 x 10 o.18 () |
on request | |
|
| T072- | Ø 725 (Ø 28.5) |
20 x 5,0 x 10 o.18 () |
on request | |
|
| T080- | Ø 800 (Ø 31.5) |
20 x 5,5 x 10 o.18 () |
on request | |